Start making the yo-yo that will be the body of Santa Claus. |
Make the head the same way of the body and sew at the center of the red yo-yo with the finishing of the head turned back. |
Measure more or less the center of the yo-yo and with a black thread make loops to divide the body in half. |
Sew the hood from the inside out, turn to the right side and sew a strip of white felt on the base of the hood. |
The cap on the head will look like |
Draw the eyes and mouth (you can paint at once) and sew a piece of wool over the mouth to serve as a mustache. |
To make the beard enter a wool in a needle leaving the size you want to beard. |
Take the cap and wrickle about 3 cm above the mouth of the hood. |
to make the base cut the mold 2 times and paste each other. |
For the nose I chose a bead and pasted with hot glue |
I put blush to highlight the face and the Santa Claus is ready |
terça-feira, 9 de novembro de 2010
Molde para papainoel de fuxico
ENCONTREI ESTE MOLDE NO BLOG ARTEMELZA
Assinar:
Postar comentários (Atom)
facil e lindo,parabens
ResponderExcluirViu que facinho, também gostei muito deste.
ResponderExcluir